I just found the SMOK TFV4 mini on the
SMOK site. 22mm width compared to 24.5mm, 3.5ml filling volume compared to 5ml.
Also there is a picture of the XCUBE Mini 75W as well as some information to more RBA heads and prebuild coils – with clapton wire!
SMOK TFV4 Tank is together with the Uwell Crown my favorite so far.
the UD Bellus today for $28.52, after coupon code RMBBUST still $27.09
Gearbest offer the
Eleaf iStick 100W dual parallel 18650 mod for $34.12. With the coupon code MAXY you can bring this down to $32.73! Definitely a good deal!
It is the “simplified version with mod only”… not that there is a lot in the box apart from an USB cable worth 20 cents.. 😉
UPDATE: getting better, $32.99 regular price, after
coupon code “promoprogb”
it is $32.04
VapnFagan released another first look at the
VapeCige VTBox200. This time on the “version 2” with some improvements.
The 510 seems to be press fitted and solid
Button is no more mushy, ring is still loose on arrival
Magnets on the door are solid and did not come off so far
Battery connector has been changed to a female one (most important change!)
Battery is still super tight in there
The black/white one seems to be painted, the red and black one anodized.
Gearbest offers the UD Bellus for preorder for $22.84 – estimated shipping after October 25th (srsly?)
Gearbest has the 28g Kanthal A1 wire from UD for $1.99! I like the UD spools as they have slits on both sides. The wire is super clean as well. $1.99 for 10 meters.. can’t get cheaper.
3FVAPE has the
UWELL Crown in silver and the UWELL Crown in black ready to ship in 24h. With the special coupon code
you get 7% off in the next 24 hours!
Also worth a look is the
SMOK X-CUBE II in silver for $59.99.
No deal, no review, much more important:
Mooch @ ECF did (and still does) some cell tests to verify the ridiculous claims rewrappers put on their cells. His
battery safety grades table is a MUST see.
Don’t fall for these numbers most of the rewrappers promise. Stick to Samsung, LG, Panasonic, Sony… But see for yourself:
Mooch’s battery safety guide
Never seen an
Eleaf iStick 100W that cheap. Cigabuy has it in a special promotion for $31.16!
Together with two Samsung 30Q, this is my all day beater mod. It is cheap enough not to worry when you scratch it 😉
Cigabuy has the UD Bellus for $21.55 as a preorder. Estimated shipping is around October 15th. The Cigabuy Coupon Code “SITE5OFF” should work and bring down the price a bit.
This is not a new deal but just a reminder that you can get an
Authentic Wotofo Sapor for $12.93 (after coupon RMBBUST) at Fasttech.
Most shops advertise this as $34.99 as regular price and $29.99 as a deal 😉
Something interesting popped up on
Fasttech: The Vapeston Maganus Ni for $22.61 (5% off with rmbbust)!
Looks promising. Starre Pro style with Crown refilling 🙂 An updated version of the original Vapeston Maganus.
Innokin Disrupter TC – which can do TC for Kanthal – just went up for preorder at efun.top ($45.50). You NEED to use the included ATC Atlas Tank to be able to use Kanthal TC (Innokin ATC system).
Also for preorder is the new
iSub Apex Top-Fill Tank ($28.50).
In one of my last posts I said that the
Vaporshark DNA200 might have some coating issues. The following statement is available from Vaporshark:
Continue reading Vaporshark DNA200 – update on coating issues
50 pieces of the
EHPRO Morph tank are available at Gearbest for $31.99. Be quick if you want to grab it!
3fvape has the SXK Zero Mini for preorder. A tiny 60W 1×18650 mod from SXK, powered by the great SXK Nebula chip. I heard that it will get an upgraded firmware version (compared to the current Nebulas) with presets for Nickel and Titanium and of course with the already known TCR menu! $55.99 is a tad high but will be worth a try!
efun.top, UD (Youde) will release a new RTA/RDA soon, called the UD Bellus. It will be available for preorder for $25.
Update: presale started!
Big Capacity: 5ml
With 32 airholes to control the airflow.
510 Threading connector
Glass Tank, compatible with Goblin Mini RTA.
Perfect combination with the RDA experience in a RTA.
New Design of side airholes, never leaking.
Direct blow coils, extreme vaper production.
Outer Diameter: 22mm
Height: 45.5 mm(without drip tip & 510 thread)
Net Weight: 56g (with drip tip); 50g (without drip tip)
Tank Size: 22 x 19 x 20 mm / 0.87 x 0.75 x 0.79 inch
Airhole Size: 1.2mm
Sense Cyclone is up for preorder at efun.top for only $29.99 and at 3fvape for only $25.99! Preorder period till September 25. Reviews look promising so far. 150W with the prebuild Kanthal coils 🙂
Vapecige seems to struggle still with the VTBox200 to fix all flaws and I am waiting for some news about how the latest batch performs. HCigar has a small shitstorm because of the brass 510 threading on the VT200 – which might be changed to a stainless steel one in a later batch and there are already some pics with peeling of coating on the Vaporshark DNA200.
First hands-on for the
Sense Cyclone tank pop up one by one. It has some nice unique new features. All in all I am not overly impressed but definitely worth a look as an alternative to the SMOK TFV4. See a review by Mike Vapes below.
The new products:
Fasttech listed some more
Fishbone RDA clones, a bunch of Drip Tips and LiPos. Nothing spectacular but the silicone sleeves for the IPV D2 look interesting.
Focalecig listed a
Vortice RDA Clone as well as a value version of the Abaddon – which is definitely worth a look for $14.99!
RiP Trippers published a first look on the
Vaporshark DNA200. Mine should ship by end of September.. so still a loong wait and grateful for every hands one.